Vehicle Weighing Solutions
JWS Vehicle Weighing Solutions
At JWS, there has been specialisation in weighbridges and vehicle weighing for many years. This enables robust, accurate designs for all types of vehicle to be provided. JWS provides solutions for all vehicle weighing applications and offer sound advice on the correct choice of equipment.
The JWS vehicle weighing solutions are made up of the following:
- Surface or pit mounted weighbridge models.
- Fully-welded steel decks of high strength design weighbridge.
- Hermetically sealed stainless steel loadcells protected to IP68.
- Fitted with lightning protection.
- Weight display with ticket printing and computer-controlled options.
- Driver-controlled system for un-manned operation.
- Installation & UK Verification carried out by JWS engineers
- Turnkey service including foundations constructed by JWS approved civil contractor.
- Portable and fixed axle weigh pads.
Surface Mounted Weighbridge Specifications
Standard Construction: Single Piece Mild Steel with guiderails, Modular Mild Steel with guiderails, Concrete Infill with guiderails as standard
Standard Dimensions: 5m x 2.5m (Min) – 18m x 3m (Max), Special sizes available on request
Standard Capacities:15,000kg (Min) – 60,000kg (Max), UK Approved for Trade Use, Special capacities available on request
Loadcells: 4 x IP68 OIML, 6 x IP68 OIML, 8 x IP68 OIML
Software: Weighbridge Management
Options: Sloping Terrain Design, Export Model, Driver Operated / Unmanned System, ATEX Zone 2 & 22 Compliance, ATEX Zone 1 & 21 Compliance, Steel Ramps / Concrete Ramps
PIT Mounted Weighbridge Specifications
Standard Construction: Single Piece Mild Steel, Modular Mild Steel, Concrete Infill
Standard Dimensions: 9m x 3m, 15m x 3m, 18m x 3m, Special sizes available on request
Standard Capacities: 30,000kg, 50,000kg, 60,000kg, UK Approved for Trade Use, Special capacities available on request
Loadcells: 6 x IP68 OIML, 8 x IP68 OIML
Software: Dynamic Axle Weighing, Weighbridge Management
Options: Sloping Terrain Design, Export Model, Driver Operated / Unmanned System, ATEX Zone 2 & 22 Compliance, ATEX Zone 1 & 21 Compliance
Portable Axle Weigh Pads Specification
Standard Construction: High Strength Aluminium Alloy
Standard Dimensions: 360mm (L) x 290mm (W) x 25mm (H) (Min) – 900mm (L) x 700mm (W) x 69mm (H) (Max), Special sizes available on request
Standard Capacities: 600kg (Min), 40,000kg (Max), UK Approved for Trade Use, Special capacities available on request
Software: Static Axle Weighing, Dynamic Axle Weighing
Optional Accessories: External Ramps, On/Off Tracking
Axle Weigher Specifications
Standard Construction: Mild Steel with 6mm Top Plate
Pit Frame: Inclusive
Standard Dimensions: 2,500mm (L) x 750mm (W) (Min), 3,000mm (L) x 750mm (W) (Max), Special sizes available on request
Standard Capacities: 5,000kg (Min), 25,000kg (Maximum), Special capacities available on request
Loadcells: 4 x IP68 OIML, 6 x IP68 OIML
Software: Static Axle Weighing, Dynamic Axle Weighing
